The display is divided into two areas (
4.7.1.- CENTRAL AREA
The central area shows the following:
The condition of the installation,
All parameters and graphs of the device.
And the necessary keys at each point,
4.7.2.- SIDE AREAS
From the side areas, you can access the device's display and set-up screens:
To access the device's main screen, see
To access the configuration screens, see
120
):
Figure 26
Central area
Side areas
Figure 26: The display is divided into three areas.
.
Table 12
Table 12: Central area keys.
Key
Restarts the device after an alarm.
Starts the active filter.
Stops the active filter.
"6.1 - MAIN SCREEN"
"7 - CONFIGURATION"
Function
AFQm IP54
Instruction Manual