Warnings - Circutor AFQm IP54 Serie Manual De Instrucciones

Description
Corrective
action
Description
Corrective
action
Description
Corrective
action
Description
Corrective
action

6.7.2.- WARNINGS

On pressing the
and the user will be asked for confirmation to continue with the filter start-up process.
This screen,
device's display.
136
The start-up conditions have not been met 10 times during the past 5 minutes.
Check the configuration and the ambient temperature. Check the quality of the power supply voltage.
If it persists, contact the TAS.
Failure in internal communications.
Restart. Contact the TAS.
The self-diagnostic system has detected a fault.
Contact the TAS.
Internal error.
Contact the TAS.
key; if there are active warnings, the screen shown in
, shows the active warnings.
Figure 52
Table 14 (Cont.): Alarm messages.
Alarm messages
Initial Conditions
Internal communications
Hardware failure
Exxx or Cxxx
Figure 51: Confirm screen.
shows the warnings that can appear on the
Table 15
AFQm IP54
, will be displayed
Figure 51
Instruction Manual