EN
Insert the power plug into the socket.
7
Press the switch to position I. The power light
8
(red) and the display will light up.
The machine will automatically refill from the
soluble hydraulic circuit.
When the machine is first switched on, the ma-
chine produces about 500 cc of water; each time
after the first about 40 cc.
Hold and pull the capsule loading lever.
9
Open the small door on the side of the dis-
10
play.
Turn the key (black) counter-clockwise to un-
11
lock the soluble compartment door.
20
SET MACHINE
Completely open the soluble compartment
12
door.
Lift and remove the cup tray.
13
Lift and remove the covers of the chocolate
14
and milk powders containers.
On the containers, the names of the solubles to
put in (chocolate and powdered milk) are la-
beled.
Add the powders directly into the specific con-
15
tainers.
To fill the soluble containers it is also possible
to remove them from their place, including
the lids:
Lift and remove the containers.
Remove the lids of the containers, fill them and
reposition them in the correct location.
Open the two shutters.
16
Replace the cup trays, close the compartment
17
door, lock it with the key (black) and close the
capsule loading lever..
DRIP TRAY LEVEL INDICATOR
On the cup tray, there is an indicator of the level
of the liquids contained in the drip tray below.
If the level indicator comes out of the hole
of the cup tray, it is necessary to empty
the drip tray/used capsules.
The extraction of the drawer clears the
counting of the capsules used!
It is therefore necessary to empty the tray
of capsules used at every extraction.