Menu Technician >> Fan Management >> Coffee >> Programmed; Menu Technician >> Layout; Menu Technician >> Reset Default; Menu Loader - LAVAZZA EP 3500 PLUS Instrucciones De Empleo

EN
MENU TECHNICIAN >> FAN MANAGEMENT
>> COFFEE >> PROGRAMMED
Select the item using the
10 Programmed
Down buttons and pressing the
Coffee
Programmed
On the display, a message indicates that the
choice has been memorized.
Programmed
Executed
.
The fan begins operating while the coffee dis-
penses and continues for a period after the end of
dispensing.
Press Esc twice to return to the
11
technician environment.
MENU TECHNICIAN >> LAYOUT
Setting the
Layout (1 or 2)
function that is attributed to the drink selection
buttons. To verify the correspondence between
the keys and drinks selection see the
NENTS section.
Select the item using the
1 Layout
buttons and pressing the
Menu technician
Layout
In the Layout environment, the following
items are present:
Layout 1
Layout 2
Select the item desired
2 (Layout 1 o Layout
using the Up/Down buttons and pressing
2)
the Enter button (in this example,
Layout
Layout 1
On the display, a message indicates that the
choice has been memorized.
Layout 1
Executed
Press Esc twice to return to the
3
environment.
technician
MENU TECHNICIAN >> RESET DEFAULT
Setting the machine on the default configu-
ration, all factory settings are restored and
all settings made will be lost.
Select the
1 Reset default
Up/Down buttons and pressing the
button.
Menu technician
Reset default
Press the Enter button.
2
28
MACHINE PROGRAMMING
Reset default
Up/
Execute?
Enter button.
On the display a message indicates that the
choice has been memorized.
Reset default
Executed
Press Esc
11
cian environment.

MENU LOADER

Select the
1
Down buttons and pressing the
ton.
Menu The Menu loader is an environment dedi-
cated to technical service personnel with
specific competence and for any access it
is necessary to enter the password. To use
the password see (MENU TECHNICIAN >>
PASSWORD SETTING MENU).
determines the
COMPO-
Menu
Loader
Up/Down
Enter button.
In the Menu loader
present:
Data Reading
Credits
MENU LOADER >> DATA READING
The machine memorizes the number of dispen-
sations made by each key, the number of liters
of water dispensed and the number of hours the
Layout 1 ).
machine is on. In the Data Reading environment
it is always possible to read such data.
Select the
1
Down buttons and pressing the
Menu loader
Data reading
In the
Data Reading
lowing items are present:
The combination
Menu
number (
1 to 8
of dispensations made by the corresponding key.
To match the number with the beverage refer to
LAYOUT.
N#1 (or subsequent N#2, N#3, N#4,
N#5, N#6, N#7, N#8).
Number of liters of water (N.lt.water).
Number of hours ON (N.hours ON).
item using the
The data reading made in the
Enter
environment coincides with that described in the
Menu technician
tions, see the section
DATA READING
MENU LOADER >> CREDITS
Programming the
ITS environment that follows has value only if the
to return to the
Menu techni-
Menu loader item using the Up/
Enter but-
the following items are
Data Reading item using the Up/
Enter button.
environment, the fol-
followed by the key
N#
) allows us to know the number
Menu loader
environment. For instruc-
MENU TECHNICIAN >>
at points 2, 3, 4, 5.
MENU LOADER >> CRED-
TECHNCIAL MENU >> CREDIT CONTROL
environment is set to .
Credits
Select the item using the
1 Credits
buttons and pressing the Enter
Menu loader
Credits
In the environment, the following
Credits
items are present:
Set credits
Alarm Level
MENU LOADER >> CREDITS >> CREDIT
SETTING
Select the item using the
2 Credit setting
Down buttons and pressing the
Credits
Credit setting
Press Enter. The three-digit numeric value
3
(030 in this example) blinks.
Credit setting
030
Using the Up/Down buttons changes the
4
numeric value (045 in this example). The use-
able values range from 0 to 999.
Credit setting
045
Press Esc to return to the
5 Credits
ment.
MENU LOADER >> CREDITS >> ALARM
LEVEL
The value that is set determines the number of
credits remaining below what the machine tells
us that the credits are.
Select the Alarm Level item using the
6
Down buttons and pressing the
Credits
Alarm level
Press Enter. The three-digit numeric value
7
(030 in this example) blinks.
Alarm level
030
Using the Up/Down buttons changes the
8
numeric value (045 in this example). The use-
able values range from 0 to 999.
Alarm level
045
Press Esc twice to return to the
8
environment.
loader
Up/Down
button.
Up/
Enter button.
environ-
Up/
Enter button.
Menu