Reminders For Cleaning; Safety And Control Devices; Direct Heat Boiling Pans; Indirect Heat Boiling Pans - ALI NPD98G Serie Instructions For Installation, Operation And Maintenance

• Do not tamper with appliance components.

REMINDERS FOR CLEANING

• Clean the satin finish stainless steel exterior surfaces, the
cooking wells and the surface of the hotplates every day.
• At least twice a year, have an authorized technician clean the
internal parts of the appliance.
• Do not use direct or high pressure water jets to clean the
appliance.
• Do not use corrosive products to clean the floor or shelf be-
neath the appliance.
• Do not wash the body or flame spreader of the hob burners
in the dishwasher.
N.B.: To ensure correct hygiene and reduce the wear and brea-
kage of the tap, remove, clean and lubricate periodically (once
a week) using food-grade grease. (For details refer to the sheet
included in the package).

3 SAFETY AND CONTROL DEVICES

3.1 DIRECT HEAT BOILING PANS

SAFETY THERMOSTAT
The manufacturer will not be liable for any damage or in-
jury resulting from failure to observe the following rules.
• The appliance is equipped with a manual reset safety ther-
mostat which interrupts heating when the operating tempera-
ture exceeds the maximum permitted value.
• To restore appliance operation, remove the control panel (the
front panel for Boiling pans and Bratt pans) and press the
thermostat reset button. This procedure must only be carried
out by a qualified, authorized technician.

3.2 INDIRECT HEAT BOILING PANS

THERMOSTAT
The appliance is fitted with a thermostat which stops activation
of heating in the event the water in the jacket falls below the sa-
fety level. The red indicator light on the control panel switches
on. Heating will restart after the water level in the jacket has
been restored. See " FILLING THE JACKET ".
PRESSURE SWITCH
The appliance is equipped with an automatic reset pressure
switch which interrupts heating when steam pressure in the
jacket exceeds optimum levels. Heating restarts when steam
pressure returns to an acceptable level.The intervention of the
pressure switch ensures reduced consumption of water in the
jacket and reduced appliance energy consumption overall.
MANOMETER
The appliance is equipped with a manometer, positioned on
the control panel, which indicates the steam pressure inside
the jacket.
SAFETY VALVE JACKETED
The appliance is equipped with an automatic safety valve (H1),
positioned on the countertop, which releases the steam con-
tained in the jacket when steam pressure approaches 50kPa
(0,5bar).
ANTI-DEPRESSION VALVE
The appliance is equipped with an automatic valve, positioned
on the countertop, which allows air to enter the jacket when the
appliance cools.

3.3 AUTOCLAVE PANS

STEAM DISCHARGE VALVE
The appliance is equipped with an automatic valve, built into
the lid, which discharges steam built up in the tank when steam
pressure approaches 5kPa (0,05bar).
SAFETY VALVE
The appliance is equipped with an automatic safety valve (H2),
built into the lid, which discharges steam built up in the tank
when steam pressure approaches 6kPa (0,06bar).

4 DISPOSAL OF PACKAGING AND THE APPLIANCE

4.1 PACKAGING
The packaging is made using environmentally friendly mate-
rials. The plastic recyclable components are:
• the transparent cover, the bags containing the instructions
manual and nozzles ( made of polyethylene - PE.).
• the straps (in polypropylene - PP).
4.2 APPLIANCE
The appliance is manufactured 90% from recyclable metals
(stainless steel, aluminum sheet, copper.... ).
The appliance must be scrapped in compliance with current
regulations governing such disposal.
• It must be disposed of properly.
• Make the appliance unusable before scrapping.
RISKS DUE TO NOISE
• As regards airborne acoustical noise emissions, the A-
weighted sound pressure level is below 70 dB(A).

INSTRUCTIONS FOR INSTALLATION

REMINDERS FOR THE INSTALLER

The manufacturer will not be liable for any damage or in-
jury resulting from failure to observe the following rules.
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and applian-
ce maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions given in this manual.
• Identify the specific appliance model. The model number is
detailed on the packaging and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the ap-
pliance.
• Do not tamper with appliance components.

5 REFERENCE STANDARDS AND LAWS

Install the appliance in compliance with current safety regula-
tions.
Install the appliance in compliance with current regulations.
3