Specification - GMC GGEN2000 Manual Del Usario

Specification

Model number: GGEN2000
Max. ambient temperature: 40°C
Max. operating altitude: 1000m MSL (3280')
Average/Max. operation time: 10h/12h
Fuel tank capacity: 15L
Power sockets: 2x 110V (CEE) 2x 230V (BS1363)
Circuit breaker: 10A
Ingress protection: IP23M
Dimensions (LxWxH): 600x465x450mm
GB
Net. Weight: 37kg (dry)
Generator:
Alternator: Copper wire winding, revolving magnetic field, self-excitation, with brush
Rated voltage: 110/230V~, dual voltage
Rated frequency: 50Hz
Phase: single-phase
Voltage adjustment: automatic voltage regulator (AVR)
Rated power output: 2kW
Power factor: 1.0
Max. power output: 2.2kW (S2, 5min)
Rated Current: 9A
Performance class: G1
Quality class: B
Engine:
Engine type: single cylinder, 4-stroke OHV
Displacement: 163cc
Max. power output: 5.5hp/4.10kW (3600min
No load speed: 3240min -1
Rated speed: 3000min -1
Fuel: unleaded petrol (95 octane or higher)
Fuel consumption: no load: 0.57L/h; max. load: 0.65L/h; average: 0.65L/h
Starting system: recoil starter
Cooling system: forced air cooled
Ignition system: transistor controlled ignition (TCI)
Recommended spark plugs: LD: F6TC, F6RTC NGK: BP6ES, SPR6ES
Recommended oil type: SAE 10W-40
Oil capacity: 0.6L
)
-1
Sound information:
According to Machinery Directive 2006/42/EC:
Sound pressure L : 73.4dB(A)
PA
Sound power L : 93.4dB(A)
WA
Uncertainty K: 1,79dB
According to Outdoor Noise Directive 2000/14/EC:
Guaranteed sound power LWA: 95dB(A)
As part of our ongoing product development, specifications of GMC products may alter
without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to vibration to calculate
the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
6