1) INTRODUCTION
Congratulations! You're now the proud owner of a high-performance salt water
chlorinator. With it, you'll never have to put chlorine or algicides into your pool again.
We would recommend that you follow the detailed instructions in this manual very
closely.
Failure to do so could increase your maintenance costs and also invalidate the
manufacturer's guarantee.
TO ENSURE YOUR UNIT WORKS EFFECTIVELY, FOLLOW THE
Prior to putting it into operation, make sure the water is properly balanced
(pH, TAC, TH), then distribute the salt in the water in the pool.
When using the unit, check the cell regularly and clean it as and when
necessary.
-
- 4 g/l for model ESR
2) THE EQUIPMENT
A complete unit includes the following:
-
a control unit
-
the electrolyser cell
-
the electrical connection cables
2.1) T
C
U
HE
ONTROL
The following items are located on the face of the unit
-
an on/off switch
-
a 3A fuse
-
a production indicator
-
a production control button
-
a Winter Mode selection button
IMPORTANT !
PROCEDURES BELOW:
NIT