Other Indications; Chlorine Production Control - Monarch Eco-MATIC-ESR Serie Manual De Instalación Y De Mantenimiento

5.2 ) O I
THER NDICATIONS
 STANDBY
The "STANDBY light comes on when the unit is getting ready to start producing
chlorine and stays on for about 30 seconds at the start of the cycle or when the cell is
not producing.
 FLOW
I there is a problem with flow, or gas in the cell, the FLOW indicator lights up, in which
case you should check the pump, the filtration system lines and the connection between
the gas detection wire and the cell.
5.3 ) C P
HLORINE RODUCTION
The values in respect of the pure chlorine produced by the unit are given in the table
below.
Control Button Position
(see below)
Pro-MATIC - ESC 16
Eco-MATIC – ESR 160
Pro-MATIC - ESC 24
Eco-MATIC - ESR 240
The above production values assume that salinity is correct and that the Winter
Mode selector is in the 'OFF' position (in the season = normal mode).
With the Winter Mode selector in the 'ON' position (off season), reduce the above
values by 15%.
C
ONTROL
"P C " P
URE HLORINE
ACCORDING TO THE
B
A
MIN
PRODUCTION CONTROL
(N
RODUCTION ORMAL
P C
OSITION OF THE
A B
3.2 g 6.4 g
/hour /hour
4.8 g 9.6 g
/hour /hour
C
D
MAX
M )
ODE SELECTED
B
ONTROL UTTON
C D
9.6 g 12.8 g
/hour /hour
14.4 g 19.2 g
/hour /hour
MAX
16.0 g
/hour
24.0 g
/hour