5.1) C
P
ONTROL
ANEL
Status Indicators
Standby
Winter Mode
Flow
3A Fuse
When the right salinity has been obtained (minimum 3 g/l for Pro-MATIC - ESC models,
4 to 5 grams per litre of water for Eco-MATIC - ESR models), you can switch the unit on
(switch in Position 1).
The small luminous "Standby" dot will light up for about 30 seconds, which is long
enough for the pump to be primed and get water flowing in the cell. When the 30 seconds
are up, the production display will read approximately 100, unless the unit is in WINTER
MODE (it will give a reading of about 85).
The luminous Standby dot will also light up during the cycle when the production of
chlorine is interrupted, during which time the production display will be off.
WINTER MODE
SELECTOR
ON
1
OFF
2
MIN
MAX
On/Off
Switch (1-0)
Production
Regulator
Button