Description/ Scope Of Delivery - WAGNER WallPerfect FLEXIO 580 I-Spray Manual De Usuario

GB
•
C over areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
N ever open the device yourself in order to carry out repairs in the electrical system!
•
T he units may only be used with a functional valve. if paints rises in the ventilating
hose (fig. 1, item 14) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
D o not lay the spray gun.
•
T he device is equipped with a thermal release which disconnects the device in case of
overheating. In this case, turn off the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. soiled air filter, slots for
air intake covered.
With original WAGnEr accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.

4. Description/ scope of delivery

1) Air cap
3) Spray jet adjustment ring
5) WallPerfect I-Spray spray attachment
7) Air volume control
9) Air filter cover (right + left)
11) Mains lead
13) Valve
15) Stirring rod
17) Practice poster
19) PerfectSpray 800 spray attachment
21) Lubricating grease*
* This is inside the container: remove it before starting operations!
44
Description/ scope of delivery (fig. 1)
Flexio 580 I-Spray
2) Nozzle
4) Union nut
6) Trigger
8) Spray gun rear part
10) Material volume adjustment
12) Container
14) Ventilating hose
16) Feed hopper (2 pcs.)
18) Replacement air filter (2 pcs.)
20) Replacement nozzle seal*