Inspection Before Driving - CLIPIC RADAR 125CC Manual Del Usuario

Inspection before driving

INSPECTION BEFORE DRIVING
Before driving, user should completely make a inspection in order to keep the motorbike in
good conditions. This habit should be cultivated.
After checking the following items, if any of them are necessary to be adjusted or maintai-
ned, please refer to all relevant episodes of the manual.
Engine oil volume-Inspecting oil level, if it is necessary, add oil into it.
Fuel-If it needs oil, please add oil into it.
Arrester (brake)-Front and rear arrester is inspected. If free movement of arrester is too
big, adjustment is needed.
Tire - Tire pressure and tires to be inspected for any possible attrition or damage.
Electrolysis rate - Electrolyte level to be checked to see if it is necessary to add more.
Throttle operation-Its running conditions, wire circuit and free movement should be ins-
pected to see if it is necessary to be corrected or replaced.
Lamp-All lamps are inspected to see if they are workable.
Driving chain-Its running conditions are inspected, and its tension is measured. If the de-
gree of tension is not proper, adjustment is needed. If dryness is found, lubricant should be
smeared.
User should replace it if there is seriously abrasion or damage.
Driving lever operation-It is inspected that if it is smooth and stable to drive.
79