RIB MASTER Wi-Fi FR Manual Del Usuario página 18

G
B
SUN CLONE 2CH
Code ACG6056
SUN CLONE 4CH
Code ACG6058
NOVA Wi-Fi
Code ACG8037
VERTIGO Wi-Fi 8
Code ACG8042
VERTIGO Wi-Fi 10
Code ACG8043
The Wi-Fi System complies with the standard EN13849-2:2008 and
together with a RIB electronic control panel is a Class 2 protection
device.
The Wi-Fi System through the use of the MASTER Wi-Fi FR card
permits the construction of a system with NOVA Wi-Fi photocells and
TOUCH Wi-Fi strips which also attach to the moveable panel without
the need for a cable collector.
The system constantly monitors the presence of the various safety devices
and the status of the batteries, completely meeting the need for active
safety for all types of openings.
Using the RIB electronic control panel it is possible for the system to
perform an auto test as required by current standards.
Each radio-controlled safety device has its own internal identification code
which distinguishes it from the others.
R
EFERENCE STANDARDS FOR AUTOMATIC DOORS AND
GATES
The installer must ensure that the Wi-Fi System is connected as specified
by the standard EN12453 as per 5.1.1.6 (points e and f) to an electronic
control panel capable of performing an operations check before closing
(AUTO TEST).
Therefore, the use of RIB devices permits system installation in compliance
with current Standards and Directives.
Once machine installation is complete it must be ascertained that it
complies with standard EN13241-1.
RIB may not be held responsible for any damage caused by improper,
wrong or unreasonable use of the product.
M
ASTER Wi-Fi
This is the heart of the system: it runs all of the control (433,92 MHz), safety
and signaling (868,3 MHz) devices programmed in the installation phase.
MASTER Wi-Fi is available in 4 versions:
- MASTER Wi-Fi with connection couplings (code ACG6094), for use
with all non-CRX RIB electronic control panels.
- MASTER Wi-Fi with terminal block (code ACG6099), for use with other
brands or RIB CRX panels.
- MASTER Wi-Fi FR with terminal block (code ACG6150), for use with
other brands or RIB CRX panels.
- MASTER Wi-Fi OS with terminal block (code ACG6152), for use with
other brands or RIB CRX panels.
SUN 2CH
Code ACG6052
SUN 4CH
Code ACG6054
TOUCH Wi-Fi
Code ACG3016 Code ACG6202
S
MASTER Wi-Fi FR can operate up to 6 safety devices (NOVA Wi-Fi +
VERTIGO Wi-Fi + TOUCH Wi-Fi + TX RED) at the same time.
- NOVA Wi-Fi photocells (code ACG8037): can be connected to a TOUCH
mechanical strip (code ACG3015) or a resistive strip on both the photocell
transmitter and the photocell receiver.
- VERTIGO Wi-Fi photocells (VERTIGO Wi-Fi 8 code ACG8042 -
VERTIGO Wi-Fi 10 code ACG8043): wireless vertical photocells
substituting the sensitive edge.
- TOUCH Wi-Fi strip (code ACG3016), with built-in transmitter/receiver.
- TX RED (code ACG6202): radio transmitter to manage mechanical or
resistive safety strips.
C
MASTER Wi-Fi FR runs up to 100 different remote control codes:
- SUN dual-channel 433,92 MHz remote controls (code ACG6052)
- SUN four-channel 433,92 MHz remote controls (code ACG6054)
- SUN CLONE dual-channel 433,92 MHz remote controls (code ACG6056)
- SUN CLONE four-channel 433,92 MHz remote controls (code ACG6058)
- BLOCK Wi-Fi mono-channel 433,92 MHz key selector switch (code
ACG6098).
MOON remote controls may be coded with a single code.
It is also possible to connect a wired controls with N.O. contact (key
selectors, push-buttons...).
V
MASTER Wi-Fi FR can operate one or more SPARK Wi-Fi Blinkers (868,3
MHz) code ACG7064.
MASTER Wi-Fi FR has LEDs for monitoring system status and for
identifying photocells or strips with low or exhausted batteries.
S
MASTER Wi-Fi FR has a buzzer which signals installation phases and a
warning if the batteries are low or exhausted or, acts as an alarm in case
one of the devices is not functioning.
18 18
18 18
RADIO NUMERIC CODER
Code ACG9434 embedd
Code ACG9436 to wall
TX RED
AFETY DEVICES
ONTROLS
ISUAL SIGNALS
OUND SIGNALS
BLOCK Wi-Fi
Code ACG6098
SPARK Wi-Fi
Code ACG7064
TOUCH
Code ACG3015
or other brands
mechanical or
resistive strip