Compliance - OHAUS Adventurer AX124 Manual De Instrucciones

Ocultar thumbs Ver también para Adventurer AX124:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN-58
11.

COMPLIANCE

Compliance to the following standards is indicated by the corresponding mark on the product.
Mark
Standard
This product conforms to the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC
and the Non-automatic Weighing Instruments Directive 2009/23/EC. The complete Declaration of
Conformity is available online at
http://europe.ohaus.com/europe/en/home/support/compliance/ce-declaration-of-conformity.aspx.
AS/NZS CISPR 11, AS/NZS 61000.4.3
CAN/CSA-C22.2 No. 61010-1-12
UL Std. No. 61010-1 (3rd edition)
Important notice for verified weighing instruments
Weighing instruments verified at the place of manufacture bear one of the preceding marks on the
packing label and the green 'M' (metrology) sticker on the descriptive plate. They may be put into
service immediately.
Weighing instruments to be verified in two stages have no green 'M' (metrology) on the descriptive
plate and bear one of the preceding identification marks on the packing label.
The second stage of the initial verification must be carried out by the approved service
organization of the authorized representative within the EC or by the national weights and
measures (W+M) authorities.
The first stage of the initial verification has been carried out at the manufacturer's work.
It comprises all tests according to the adopted European standard EN45501:1992, paragraph
8.2.2.
If national regulations limit the validity period of the verification, the user of the weighing instrument
must strictly observe the re-verification period and inform the respective W+M authorities.
FCC Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Industry Canada Note
This Class A digital apparatus complies with Canadian ICES-001.
Find Quality Products Online at:
GlobalTestSupply
www.
ADVENTURER BALANCES
.com
sales@GlobalTestSupply.com

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido