Item Settings; Totalization - OHAUS Adventurer AX124 Manual De Instrucciones

EN-24
4.7.3

Item Settings

To view or adjust the current settings
Touch the Item Settings button. The Settings screen appears.
Mode: Choose between Peak Hold and Display
Hold (default).
Sample Name: Assign a name to the sample.
Print settings: Change printing settings. See section
7 for more information.
Note: The Save to USB button will only appear after a USB
flash drive has been connected to the balance. See section
4.1.3 for more information.

4.8 Totalization

Note: Before using any application, be sure the balance has been leveled and calibrated.
Totalization measures the cumulative weight of a sequence of items. The cumulative total may exceed the
capacity of the Balance. The maximum number of samples (n) is 99.
Totalization
1. In the upper left portion of the home screen, select Totalization
2. Place item on the pan to begin. The sample weight is shown on the Main Display Line.
3. Press Accumulate to add the weight (when stable) of the item to the total.
4. Remove the item from the weighing pan, then add the next item and continue as above.
5. Press Result to view the results from the totalization.
6. When finished, press the Clear Total button to reset the accumulated weight to zero.
7. Press Save to USB to save the result to a USB flash drive or Exit to return to the Totalization Home
screen.
Note: Changing units converts the Accumulation results to the selected unit.
Find Quality Products Online at:
The Totalization Home screen
Main Display Line
Reference Fields
Application Buttons
GlobalTestSupply
www.
ADVENTURER BALANCES
Application
.com
sales@GlobalTestSupply.com
Icon