Operating Your Luggie - Luggie Smart Fold Manual De Instrucciones Para El Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Use the trigger to adjust the tiller to the most comfortable angle for you and to fold the
tiller up and down for ease of transport.
SERVICE - Your Luggie has been designed to be service friendly. Sealed lithium
battery which is virtually maintenance-free will give your Luggie the power it
requires. Should you need to take your battery pack on an aircraft, use the battery
box originally shipped with your Luggie scooter for transport. The battery box has
been specially designed to safely carry lithium battery of this size in accordance
with the International Air Transport Association (IATA). (Please consult your
carrier of choice for additional details).
SAFETY - The speed controller has been designed with extensive self-checking
circuits to give you the maximum 'state-of-the-art' safety technology.The
Luggie comes with a fully automatic braking system for peace of mind in any
environment.
CHARGING -
the battery meter is in the red zone, it is advised that you charge your battery. Follow the
Battery & Battery Charging guidelines outlined on page 23-30 of the manual.
Caution : DO NOT power off when the scooter is in motion; this will automatically
activate the motor parking brake and could place you in a dangerous situation.
Your Luggie is fitted with anti-tipping wheels in the rear of the scooter. DO NOT
remove these anti-tipping wheels. They are an important part of the Luggie designed
specifically for your safety. They help protect against backwards tipping on excessively
sharp inclines.
Before setting out on your Luggie, you need to make sure that your seat is in the
correct riding position. Set the seat to your desired height for your needs.
UNFOLD LUGGIE SCOOTER
1. Make sure your Luggie is on flat ground before adjusting the height of the seat.
With the scooter upright as shown in (FIG 1), pull the chassis locking release
ring to your scooter to separate the front and rear chassis. Once the front and rear
chassis are disengaged, guide the scooter down by holding the base of the seat
with both hands. Refer to the enclosed Quick Start Guide for additional details.
Your scooter should now look like (FIG 2) when unfolded.

OPERATING YOUR LUGGIE

FIG 1
FIG 2
8

Publicidad

Tabla de contenido
loading

Productos relacionados para Luggie Smart Fold

Este manual también es adecuado para:

Easy go

Tabla de contenido