ResMed AirCurve 10 ST-A Guia Del Usuario página 22

Physical - device and water tub
Dimensions (H x W x D):
Air outlet (complies with ISO 5356-1:2004):
Weight (device and standard water tub):
Weight (device and cleanable water tub):
Housing construction:
Water capacity:
Standard water tub - material:
Cleanable water tub - material:
Temperature
Maximum heater plate:
Cut-out:
Maximum gas temperature:
Air filter
Standard:
Hypoallergenic:
Aircraft use
ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21,
category M) for all phases of air travel.
Wireless module
Technology used:
Frequencies:
Max RF power output:
FCC ID: 2ACHL-A10STACD, 2ACHL-A10STA3G
IC: 9103A-A10STA3G
The AirCurve 10 device complies with FCC Rules and Industry Canada Rules.
The AirCurve 10 device should be used at a minimum distance of 0.8" (2 cm) from the body during operation.
Additional information regarding the FCC Rules and IC compliance for this device can be found on
www.resmed.com/downloads/devices
Operating pressure range
S, ST, T, PAC, iVAPS:
CPAP
Supplemental oxygen
Maximum flow:
20
4.57" x 10.04" x 5.91"
(116 mm x 255 mm x 150 mm)
22 mm
47.1 oz (1336 g)
47.1 oz (1336 g)
Flame retardant engineering thermoplastic
To maximum fill line 380 mL
Injection molded plastic, stainless steel and silicone seal
Injection molded plastic, stainless steel and silicone seal
154°F (68°C)
165°F (74°C)
≤ 106°F (≤ 41°C)
Material: Polyester non woven fiber
Average arrestance: >75% for ~7 micron dust
Material: Acrylic and polypropylene fibers in a polypropylene
carrier
Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron
dust
CDMA (USA only), 3G (USA and Canada only)
2G GSM (all regions except USA and Canada)
CDMA (850/1900 MHz)
3G (850/900/1700/1800/1900/2100 MHz)
2G (850/900/1800/1900 MHz)
CDMA 24.5 dBm
3G 33.0 dBm
2G 33.0 dBm
3 to 30 cm H O
2
4 to 20 cm H O
2
15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS)