Steam Dispensing - LaCimbali M39 Dosatron TE Manual De Uso Y Instalación

Scalding hazard! Use the appropriate insulating
devices (a) to move the water and steam wands.
Dispensing with the Turbosteam selector (13)
Machines equipped with the TURBOSTEAM (STOP STEAM)
dispensing system have the "stop steam dispensing when
set temperature is reached" function, and can rapidly heat
and froth milk.
The Turbosteam selector keys have different functions
according to the following configuration:
TS4 frothed milk (high froth);
TS3 frothed milk (medium froth);
TS2 frothed milk (low froth);
TS1 heated milk;
steam.
NOTE: During the programming phase, the Turbosteam
selector keys (TS1 ÷ TS4) can be configured differently
according to different needs.
Insert the steam nozzle (9a) into a suitable container, making
sure the bulb is completely immersed in the milk.
Choose the type of milk you prefer and press the related
key.
Once the set temperature has been reached, steam dispensing
will stop automatically.
Dispensing can be interrupted at any time by pressing any
Turbosteam selector key (13).
Steam dispensing with knob control
The steam frother system (20) is suitable for beverages that
need to be mixed because the steam flow can be gradually
opened.
Insert the steam dispensing wand (9) in a suitable container.
Open the steam and close it when the beverage is heated.
note: at the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.

12. Steam dispensing

a
49
TS1
TS4
TS3
13
9a
20
a
9
TS2