Technical Specifications; Packing List - J.P. SELECTA Autester ST Dry PV III Manual De Instrucciones

INSTRUCTION MANUAL

3. Technical Specifications

Autoclave model:
Mains voltage:
Electrical power: (W)
Maximum intensity: (A)
Fuses: (fast. type H, dimensions: 10x38mm)
Network connection cable:
Weight (Net Kg):
Useful measures: (cm Ø x depth)
Ext. measures: (cm Depth x Width x Height)
Volume: (Litre)
Maximum load: (Kg) (Metal)
Maximum load : (flasks)
Water volume per cycle: (Litres)
Water quality:
Water tank volume: (Litres)
Air inlet filter:
Acoustic level:
Environmental conditions:
Overpressure level:
Pollution degree:
Vapour contact material
Frame material:
Vessel material:
Vapour generator material:
Pipes material:
RS-232 outlet:

4. Packing List

Autoclave delivered together with:
-
-
-
J
.P. SELECTA s.a.u.
CODE 80330 REV B September 2017 (It can be modified without notice)
Instruction manual
Internal grid
Emergency open door device.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Autester ST DRY PVL III 25L.
230V I
2510
11
16
Phase, Neutral, Earth (section 1,5 mm
60
Ø30x35
58x46x59
25
5
250ml flasks 12
500ml flasks 9
1000ml flasks 3
0.8
Demineralized over 50 micreS/cm, pH between 5 & 7
7
Porosity 0.20 micres
Less than 70 dBA
Inner use.
Altitude up to 2000m.
Temperature between 5ºC & 40ºC.
Max. relative humidity 80% for temperatures till 31ºC, reducing in a
linear way up to 50% of 40ºC relative humidity.
Category II
2
Stainless steel, copper, teflon, brass
Steel with cover
Stainless steel
Stainless steel
Copper, brass and teflon
9 pin male connector. Pin 2 & 3 crossed, common pin 5. Speed
9600, no parity, data 8 bits, stop 1 bit.
Page: 20
)
2
Tel 34 93 770 08 77 Fax 34 93 770 23 62