Nuova Simonelli AURELIA II Digit Manual Del Usuario página 56

7.2.3 SET POINT
TEMPERATURE
Use the rotary switch to move to the "Set point
temperature" and press to enter:
Dose Dose Temperature Temperature ture
Language Language
programming programm ming ming setpoint setpoin n t setpoin nt
Energy Energy Pour Pour Alarms s Alarms s
saving count
4 options will be displayed:
Group Group B Boiler oiler Ste Steam boiler eam bo oiler
setpoint t setpoint se setpoint etpoint t set setpoint tpoint
Icon Description
Group setpoint
(T3 version only).
Setpoint caldaie
(solo versione T3).
Steam boiler setpoint.
Cup warmer.
56
GROUP SETPOINT (T3 version only)
The display will show:
M Main Menu
Key y Key Key and display Key y and dis y and disp y and display
settings settings
94.0
92.0
Technical Technical
settings settings
Use the rotary switch to select the coffee group
to adjust and confirm by pressing.
Setpoint Setpoint
Group 1 example:
Setting programmed
Cup warmer C up warmer
/ to be programmed
94 0 94.0
110.8
Instant setting
Turn the rotary switch to select the required
temperature for the group, then press to con-
firm.
:
Group setpoint
3 3
Group setpoint
93.8
93.8
Group temperature
92.8 92.8
Group setpoint
3 3
Group setpoint
93.8 93.8
Group temperature
109.6 109.6
GROUP OFFSET ADJUSTMENT:
From the screen:
3 3
Group setpoint
94.0
93.8 93.8
Group temperature
92.0 92.8 92.8
Hold down the washing key
offset and group temperature adjustment.
The next screen will be:
3 3
Group offset
1.0 1.0 1.0
With the rotary switch it is possible to select the
group offset to be adjusted and press to pro-
ceed.
Use the rotary switch to adjust the value of the
group offset and then confirm with by pressing
the switch.
At this point, it is possible to adjust the offset of
the other groups with the same procedure or to
select or .
Menu Home
This setting is reserved to qualified service
engineers.
Group setpoint
to access