Nuova Simonelli AURELIA II Digit Manual Del Usuario página 61

time, the machine returns to the initial condition
where, by turning the rotary switch, it is possible
to view the settings for the different days of the
week, home and menu.
it is possible to view the settings for the different
days of the week, home and menu.
ACTIVE GROUPS :
This function serves to set the groups that are
actually active when the machine is switched
on:
Active Active
groups groups
1 2
To set the active groups when the machine is
switched on, proceed as follows:
switch on the active group icon.
groups using the rotary switch. Press the
rotary switch to confirm and pass on to the
next group. Confirming the last group will
return to the menu.
to go back to the
Home
home page.
NOTE: To make the change effective, it is nec-
essary to quit the programming mode,
switch the machine on and off from the
main switch, which us located In the
bottom right.
When the deactivated group is switched back on,
its colour will be darker and the group will no
longer be operational (e.g. group 1 deactivation).
°C
1.2 bar
The change is permanent and can only be can-
celled following the same procedure as used to
enable it.
Active groups
It is also possible to deactivate the groups with-
out entering the programming mode.
From the following stand-by screen:
°C
3
1.2 bar
Press the button
in case of the S version, or the long coffee
key on the V version; the corresponding
group will be disabled, causing the display to
read (E.g. group 1 de-activated):
°C
1.2 bar
Sunday 21 March 14:45
°C °C
Menu
Sunday 21 March 14:45
°C °C
Menu
and coffee key together
Sunday 21 March 14:45
°C °C
Menu
The change is not permanent in that every time
it is switched on from the main switch, all of the
groups will be active.
NOTE: The change is not permanent in that
every time it is switched on from the
main switch, all of the groups will be
active.
NOTE: If a group is disabled, it is not possible
to make any deliveries and the boiler
heating elements will be switched off.
61