SETTING THE FLOW KNOB
SETTING THE FLOW KNOB TO THE
PRESCRIBED SETTING (FIGURE 5)
1. Attach the nasal cannula to the outlet fitting of the cylinder.
2. Turn the flow knob to the L/min. setting prescribed by your
physician or therapist.
As changing the L/min. setting on the flow knob will affect
the dose of oxygen delivered, DO NOT readjust the
L/min. setting unless directed by your physician or therapist.
3. To turn the flow of oxygen OFF, turn the flow knob
counter-clockwise to the 0 (OFF) position.
Prescribed Setting
FIGURE 5 - SETTING THE FLOW KNOB TO THE
REFER TO COMPRESSOR OWNERS MANUAL
1100873 FOR DETAILED INFORMATION ON ALL
WARNINGS, USE, CARE AND MAINTENANCE OF
THE HOMEFILL II COMPRESSOR.
WARNING
PRESCRIBED SETTING
NOTICE
19
PROCEDURE 3
Outlet Fitting
Flow Knob
PART TWO