Positioning Of The Pump - Della Toffola S/P Instrucciones Originales

2.2

POSITIONING OF THE PUMP

The pump can run in all mounting positions. Put the pump steadily in the work
position, mainly when it must work on an inclined or raised plane. The bare
shaft pumps (S/P) and the coaxial pumps (E/P) can be fixed using the holes on
the support or on the electric motor. The level of the product to be transferred
must be at a maximum depth of 6 mt from the pump axis (see examples). The head
( ) determines the capacity and it depends on the pump type; the higher is the H
head the lower the capacity will be (see features table). To connect the pump
fitting holes please use rigid or reinforced pipes with right correspondent
fittings. We suggest to use short inlet pipes for an easy self priming intake
(automatic suction).
ATTENTION! - Fasten the pump steadily when using the pump on
an inclined or raised plane. Be sure that the base on which
the pump must operate can support the weight of the pump.
ATTENTION! - Do not use the pump with installations not in
accordance with the CE standards or for uses not allowed by
the producers. Do not disassemble or replace the security
parts set by the producer.
ATTENTION! - In case of transferring toxic or polluting
fluids prepare the work site with proper security devices, in
order to protect the environment.
18