Pump With Radio Control - Della Toffola S/P Instrucciones Originales

ATTENTION! - The operating parameters of the frequency
converter are already regulated by the producer and no other
modifications are required. The use of the small panel (E) on
the
modification of the parameters can alter the proper operation
of the pump.
A
B
3.5

PUMP WITH RADIO CONTROL

Description: control pannel with frequency converter and radio control for the
local or remote controlling of the pump. After the pump has been switched on
through the main switch, it is possible to control the pump directly from the
main control pannel or through the radio remote control (except the minimum
speed restart function). The use of the remote control is reported in the main
control pannel by the lighting of the corresponding buttons; for example,
pushing the stop red button on the radio control, will turn on the red light
button on the panel. The controller can be used effectively in a 100m radius of
the apparatus.
Command desription and optical signals:
MAIN SWITCH [ ] A
control pannel is turned on, the frequency converter display [ ] turn on as
well and the pump is in the STOP position, indicated by the lighting red button
[ ]. B
STOP BUTTON (RED) [ ]
case. On the control pannel, the STOP lighting signal has different funcion:
constant light if the stop command was given by the operator (stop untill other
command), flashing is the stop signal was given by external signal (temporary
stop related to the external signal).
frequency converter
C
– The main switch turn on/off the control pannel. When the
B – By pressing the STOP button the pump is stopped in any
is not recommended
E
24
and the
F
F
G
H