Printing Sample; Paper Feed - MEGABRAS MD-5060x Guia Del Usuario

Megóhmetro digital
Ocultar thumbs Ver también para MD-5060x:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Printing sample

Paper feed

The (, switch, which is a blue key located in the left upper part of the printer body,
is the Paper feed control. Press this key 3 times after the test is finished and before
cutting the paper, in order to visualize the last lines.
ATTENTION: Don't pull the paper, always use the Paper feed key. Never try to put the paper
back into the printer. In any of these cases, the printer can be easily damaged.
Paper
White side
Yellow side
This printer uses 37mm-wide thermal paper, which comes in
a 33mm-diammeter reel. The figure shown below indicates
how to put the paper. Press the key (, (until the paper ap-
pears). To remove the old paper reel, cut the paper next to it
and press the key (. The removal used-reel operation must
be carried out in this way due to the fact that the paper
movement is in one-way only, that is, the paper can be
moved in one direction only.
25

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido