Parts Ordering Information; Service And Maintenance - Ingersoll Rand LV Serie Manual De Instalación Y Operación

Gears
Unscrew nuts on the opposite side of the hoist as the hand lever, and remove gear cover. Remove old
grease and replace with new. For temperatures -29º to 10º C (-20º to 50º F) use EP1 grease or equivalent.
For temperatures -1º to 49º C (30º to 120º F) use EP 2 grease or equivalent.
Retainer Plate (L5H hoist only)
Lightly coat the mating surfaces between the retainer plate and support with Ingersoll-Rand LUBRI-
LINK-GREEN or equivilant to ensure free knob smoothly shifts from both RED to GREEN position and
GREEN to RED position.
Load Chain
WARNING
• Failure to maintain clean and well lubricated load chain may result in chain failure causing
injury, death or substantial property damage.
1. Lubricate each link of the load chain weekly. Apply new lubricant over existing layer.
2. In severe applications or corrosive environment, lubricate more frequently than normal.
3. Lubricate hook and hook latch pivot points with the same lubricant used on the load chain.
4. To remove rust or abrasive dust build-up, clean chain with acid free solvent. After cleaning,
lubricate the chain.
5. Use Ingersoll-Rand LUBRI-LINK-GREEN or a SAE 50 to 90 EP oil.

PARTS ORDERING INFORMATION

The use of replacement parts other than Ingersoll-Rand Material Handling may invalidate the
Company's warranty. For prompt service and genuine Ingersoll-Rand Material Handling parts provide
your nearest Distributor with the following:
1. Complete model number as it appears on the nameplate.
2. Part number and part name as shown in parts manual.
3. Quantity required.
Return Goods Policy
Ingersoll-Rand will not accept any returned goods for warranty or service work unless prior
arrangements have been made and written authorization has been provided from the location where the
goods were purchased.
Hoists returned with opened, bent or twisted hooks, or without chain and hooks, will not be repaired or
replaced under warranty.
Disposal
When the life of the hoist has expired, it is recommended that the hoist be disassembled, degreased and
parts separated by material so that they can be recycled.

SERVICE AND MAINTENANCE

Hoist repair and maintenance should only be carried out by an Authorized Service Repair Center.
Contact your nearest Ingersoll-Rand office for details.
The original language of this manual is English.
LV, L5H and SL Hoist Parts and Maintenance information is available in English by requesting the
following publications:
LV Parts, Operation and Maintenance Manual Form Number MHD56027.
L5H Parts, Operation and Maintenance Manual Form Number MHD56080.
SL Parts, Operation and Maintenance Manual Form Number MHD56109.
10