Parts Ordering Information; Service And Maintenance - Ingersoll Rand PALAIR Manual De Instalación Y Operación

1. Lubricate each link of the load chain weekly. Apply new lubricant over existing layer.
2. In severe applications or corrosive environment, lubricate more frequently than normal.
3. Lubricate hook and hook latch pivot points with the same lubricant used on the load chain.
4. To remove rust or abrasive dust build-up, clean chain with acid free solvent. After cleaning, lubricate the chain.
5. Use Ingersoll Rand LUBRI-LINK-GREEN or a SAE 50 ISO VG220 oil.
Hook and Suspension Assemblies
1. Lubricate the hook and hook latch pivot points. Hook and latch should swivel/pivot freely. Use Ingersoll Rand
LUBRI-LINK-GREEN or a SAE 50 ISO VG220 oil.
2. Lubricate bottom hook grease fitting monthly or more frequently, depending on severity of service. Use a standard
No.2 multi-purpose grease.
Gear Housing (Palair Plus)
The gear housing is packed with a good quality EP2 grease with a dropping point of 250° C and a viscosity of 1100 SUS
at 38° C on assembly.
Gear and Brake Housing (Liftchain)
Fill gear housing to level plug with 90W ISO VG150 oil.
The use of replacement parts other than Ingersoll Rand's may invalidate the Company's warranty. For prompt service
and genuine Ingersoll Rand parts provide your nearest Distributor with the following:
1. Complete model number as it appears on the nameplate.
2. Part number and part name as shown in parts manual.
3. Quantity required.
Return Goods Policy
Ingersoll Rand will not accept any returned goods for warranty or service work unless prior arrangements have been
made and written authorization has been provided from the location where the goods were purchased.
Hoists returned with opened, bent or twisted hooks, or without chain and hooks, will not be repaired or replaced under
warranty.
Disposal
When the life of the hoist has expired, it is recommended that the hoist be disassembled, degreased and parts separated by
material so that they can be recycled.
Hoist repair and maintenance should only be carried out by an Authorized Service Repair Center. Contact your nearest
Ingersoll Rand office for details.
The original language of this manual is English.
Hoist Parts and Maintenance information is available in English by requesting the following publications:
Palair Plus Hoist Parts, Operation and Maintenance Manual Form Number MHD56043
LCA Liftchain Hoist Parts, Operation and Maintenance Manual Form Number MHD56140

PARTS ORDERING INFORMATION

SERVICE AND MAINTENANCE

10