PROPAIN HUGENE CF 29 Instrucciones De Montaje página 10

// ADJUSTING THE SUSPENSION ELEMENTS
1
1. Unscrew the valve cap of the shock / fork.
2. Screw on the shock pump and pump the shock / fork up to the required pressure.
Observe the instructions for operating the shock pump.
We recommend a SAG* of 15% - 20% on the fork and 20% - 30% on the shock.
Please pay attention to the manufacturer' s instructions of the suspension elements for the air
pressure. The corresponding manuals are included.
3. Unscrew the shock pump and screw the valve cap onto the valve.
A B
* The air pressure of your suspension elements is adjusted via the so-called
SAG (negative travel). The SAG is the degree by which the shock and the fork
riding position. No air can escape when unscrewing the shock pump.