TASK/CHECK
The front and rear wheel must lock when the brake lever is pulled.
Check the bite point of the brakes: Pull one brake lever after the other while standing.
The bite point must be felt around half way down the brake lever travel.
Check the brake pads for wear.
Check the disc rotor for wear.
It should not be possible to turn the handlebar with normal force.
No bearing play must be detectable.
Make sure that all components are tight.
It should not be possible to turn the saddle or seat post.
It shall not be possible to twist the grips by hand.
PROPAIN Service.
Before each ride
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X