Disposal of the product
This product constitutes an integral part of the automation system, there-
fore it must be disposed of along with it.
As in installation, also at the end of product lifetime, the disassembly and
scrapping operations must be performed by qualified personnel.
This product is made up of different types of material, some of which can be
recycled while others must be disposed of. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this
product category.
Caution! – some parts of the product may contain pollutant or hazardous sub-
stances which, if disposed of into the environment, may cause serious damage
to the environment or physical health.
As indicated by the symbol on the left, disposal of this product
in domestic waste is strictly prohibited. Separate the waste into
categories for disposal, according to the methods envisaged
by current legislation in your area, or return the product to the
retailer when purchasing a new version.
Caution! – Local legislation may envisage serious fines in the event of abusive
disposal of this product.
Battery disposal
Even if discharged, the batteries can contain pollutant substances and therefo-
re must NEVER be disposed of in common waste collection points. After remo-
ving the battery from the product, dispose of in accordance with local regula-
tions governing classified waste disposal and collection.
Technical specifications of product
Type: programming and code control unit for the following Nice products:
• receivers in the series NiceOne and SMX
• receiver-transmitter systems with "Bio", "Flo", "FloR", "Smilo" and "O-Code" encoding;
• access control systems with "Morx" decoder; MOM transponder card readers or MOT
digital keypads
• devices using the TTBUS system;
Radio technology: radio receiver-transmitter at frequency of 433.92 MHz. Range up to
10 m.
Compatible connectors and devices:
• support area for transmitters in the series "NiceOne" (programming is via radio, without
contact);
• connector for memory boards "BM 60", "BM 250", "BM 1000".
• connector for receivers in the series "SMX" and "NiceOne" (specific models, by means of
adaptor cable);
• connector for transmitters in the series Bio, FloR, Very VR, Ergo, Plano (by means of
adaptor cable);
• optical reader connector for transmitters in the series "Bio".
• transponder card proximity reader;
• connector for TTBUS devices (by means of adaptor cable);
Connection to computer:
• Connector for USB cable
• Connector for RS232 serial cable
• Wireless connection with Bluetooth
®
Power supply:
• Internal: by means of rechargeable battery 6 V, 700 mAh.
• External: via USB connection to computer or via power supply unit mod. ALA1, 12 Vdc,
Battery recharging time: approx. 15 hours.
Battery charge duration: approx. 10 hours of operation or 3 months on stand-by.
Battery lifetime: at least 100 complete discharge cycles.
Casing protection rating: IP 20 (use indoors or in protected environments only).
Operating temperature: from -20°C to +55°C
Dimensions (mm): 194 x 115 x H 40
Weight (g): 410 (O-Box) - 460 (O-BoxB)
technology (OboxB version only)
English – 15