Nice O-Box Instrucciones Y Advertencias Para El Uso página 9

3.2 – STARTING A WORK SESSION
To start a work session, proceed as follows:
– turn on O-Box;
– connect the device required to O-Box;
– start up the software (the home page is displayed);
– on the home page, press the button for the required section area;
– work in the subsequent section windows.
3.3 – TRANSMITTERS SECTION
To access this area, first connect a transmitter to O-box and proceed as fol-
lows:
01. On the home page click on the icon "Transmitters" (fig. 3).
02. A main window is displayed for entry to the Transmitters section (fig. 5):
select the family and model of the transmitter to be programmed and click
on Next (on the browser bar) to move to the next page for programming
the transmitter.
Note – For NiceOne transmitters only: if the transmitter is positioned in
the O-box programming area before accessing the Transmitters section,
the software automatically recognises the transmitter model and displays
the relative data, including the identity code and RND code.
Otherwise, if the transmitter is positioned in the O-box programming area
after accessing the Transmitters section, click on "Refresh" to ensure that
the software recognises the transmitter model and displays the relative
data.
03. A second Transmitter section window is displayed for programming (fig.
6): in the Functions menu, select the required item and work in the opera-
tive area for modifying and adding parameters as required.
IMPORTANT – Some functions offer the possibility of programming sever-
al transmitters in sequence, by simply connecting one transmitter after
another to O-Box. Confirmation of successful programming and the signal
to indicate that the next transmitter can be positioned in place of the pre-
vious one is given by two beeps.
5
6
English – 7