• For more ease, we recommend to pull the garment downward with
your free hand while steaming. Be careful not to touch the hot steam.
• During use, the hose may make a gurgling noise. This is a normal
occurrence due to condensation. If you hear the gurgling noise, hold
the hose up to direct the condensation back into the appliance.
x2
fig.15
fig.19
Empty tank detector
This appliance is equipped with an empty tank detector. When the water
tank is empty, a beep sound is emitted for a duration of 1 minute and
the light indicators on the steam head will blink to alert you to fill the
water tank. Turn off the appliance and fill the water tank.
The appliance will automatically shut off after 1 minute if the water tank
remains empty.
Caution : the empty tank detector does not work with fully distilled
or demineralized water. We recommend you to use T P W TER. If
the water in your area is hard, mix half tap water and half distilled
water.
uto-Off function
• This garment steamer is equipped with the uto-Off function to ensure
optimum safety. Thus, if the steam head stays motionless for 5 minutes,
a beep sound will be emitted for 2 minutes before the automatic shut-off.
• The garment steamer automatically turns to « Energy saving » mode
before the automatic shut-off. During this time, the steam output is
Min.
fig.16
22
x1
Max.
x5
fig.17
fig.18