Scubapro Xtender Manual Del Usuario página 8

Adjusting the date and time
Press the "lock" button and choose the value you want to change with the
"select" button; the sequence is: seconds > minutes > hour > year > month >
days > hour format > seconds >... The value you are changing will fl ash, and you
can increase it one unit at a time by pressing the "light/set" button. Press and
hold the button to scroll through the values quickly. When adjusting the seconds,
if you press "light/set" when the value is between 30 and 59, one minute will be
added; the same is true for day, month, and year.
When adjusting the hour, moving from 59 minutes to 00 does not change the
hour value, just as moving from hour 23 to hour 0 does not move you to the
next day.
You can also choose whether you want to display the time in AM/PM or 24 hour
format by pressing the "light/set" button when the hour number and minute
number are fl ashing. The AM/PM format is indicated by the letter "A" or "P"
shown to the left of the time value, respectively from 12:00AM and 11:59AM and
from 12:00PM and 11:59PM.
After making your changes, press "lock" again to return to watch mode, or
simply wait 2-3 minutes.
Setting the alarm clock
The alarm clock function lets you set a daily alarm, or activate or deactivate an
hourly signal. Access alarm clock mode with the "mode" button; the letters "AL"
will replace the indication of the date. Then, press the "lock" key, which will allow
you to set the time. Once you have made your changes, press "lock" again
to return to alarm clock mode. Now choose whether you want to enable the
alarm, the hourly signal, or both, using the "select" button. Depending on your
selections, the alarm clock icon, hourly signal icon, both, or neither will appear
above the time.
8