Control Pad Functions; Temperature Conversion - Kenmore 790.4710 Serie Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Control
Pad Functions
Note:
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are the
same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN, For satisfactory use of your oven, become familiar with
the various functions of the oven as described below.
STOP CLEAR-- Used to clear any
function previously entered except
the time of day and minute timer.
Push STOPCLEARto stop cooking.
BAKE PAD--
Used to
enter the normal
baking mode
temperature.
BROIL-- Used
to select the
variable broil
function.
SELF CLEAN
PAD-- Used to
select the self-
cleaning cycle.
UP and DOWN ARROWS PADS -- Used along with
the function pads to select oven temperature,
cooking time, stop time (when programming an
automatic stop time), time of day, clean time and
minute timer.
Oven
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN" light will glow each
time the oven unit turns on to maintain the set oven temperature. The
"PREHEAT" light will glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks when the self-clean
cycle is in use. It glows constantly after the door locks.
CLOCK PAD--
Used to set the
time of day.
TIMER SET/OFF PAD--
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking.
FEATURE
INDICATOR
LIGHTS--These
light to show
which feature is
in use.
COOK TIME
PAD -- Used
to enter the
length of the
baking time
(if equipped).
STOPTIME
PAD -- Used
to set the
::
desired stop
iiS!_i;
time for
baking. Can
be used with
BAKE TIME to
program a
delayed bake
cycle (if
equipped).
The oven
can be programmed
to: BAKE
normally,
TIME
BAKE,
BROIL,
SELF-CLEAN
Note: The oven function will not work if the time of day clock is not set.
For a silent
control
panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME pad @.
After 7 seconds, the control will beep once. This will block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad @
again for 7 seconds until 1
beep is heard.
Temperature
Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170% to 550% (65°C to 287°C).
To change the temperature
to °C (celsius) or from °C to °F (control
should not be in a Bake or Clean mode):
1.
Push BROIL pad _.
"-- " appears in the display.
2.
Push and hold the UP ARROW ^ pad until "HI" appears in the display.
3.
Push and hold BROIL pad _
until °F or °C appears in the display.
4.
Push UP ^ or DOWN ARROW -, pad to change °F to °C or °C to °F.
5.
Push any function pad to return to normal operating model3

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido