Installing the Telephone System
Press Keys:
6
Leave the handset for about 12–14 hours in the
base station to charge the batteries. The charging
status symbol flashes on the handset, indicating
that the batteries are being charged:
K
Batteries empty
(symbol flashes)
1
J
Batteries
/
3
charged
• Once the initial charging operation is com-
pleted, replace your handset into the base
station after each call. Charging is con-
trolled electronically. This ensures opti-
mum charging and prolongs battery life.
• The batteries heat up during charging. This
is normal and not dangerous.
• The battery charging status is correctly dis-
played only after uninterrupted charging/
discharging. You should therefore avoid
opening the battery compartment unnec-
essarily.
Attaching the Belt Clip
Push the belt clip onto the back of the handset until
the tabs click into place.
I
2
Batteries
/
3
charged
H
Batteries fully
charged