Setting Up The Handset; Inserting The Batteries - Siemens Gigaset 4015 Instrucciones De Manejo E Indicaciones De Seguridad

Press Keys:

.
Installing the Telephone System

Setting Up the Handset

Remove the protective plastic film
from display.

Inserting the batteries

• Insert the batteries, as shown above.
• Place cover and push gently upward until it clicks
into place (the unit is shipped with the battery
cover off).
• To open, press the grooved area on the cover and
slide back.
• Use only "AA" rechargeable NiCd or NiMH
batteries. Do not use Alkaline, Lithium or
non-rechargeable batteries.
• Never use non-Siemens charging units as
these could damage the batteries and
phone.
Placing the Handset into the Base Station
and Charging the Batteries
Before using your handset, place it in the base sta-
tion with the display facing upward. After about one
minute, the handset's internal number is shown in
upper left hand corner of display (for example, "1").
For information on how to register additional
handsets (bought separately), see page 37.
Note:
Your Gigaset is now ready for operation. Your an-
swering machine is set with a standard announce-
ment. Please set date and the time (see page 8), so
that the time of incoming calls can be noted correct-
ly.
5