Connecting The Base Station To A Pbx; Changing The Dialing Mode; Setting The Flash Time - Siemens Gigaset 4015 Instrucciones De Manejo E Indicaciones De Seguridad

Connecting the Base Station to a PBX

Press Keys:

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
BASE SETT

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
SPECIAL FCT
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DIAL MODE
 
NNNNNNN NNNNNNN

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
BASE SETT

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
SPECIAL FCT

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
FLASH TIME
 
NNNNNNN NNNNNNN
46
Connecting the Base Station
to a PBX
Your Gigaset may be operating behind a PBX.

Changing the Dialing Mode

It is necessary to change the dialing mode only if
your PBX does not operate with the preset tone di-
aling (DTMF – dual-tone multifrequency). Please re-
fer to the operating instructions of your PBX.
Options:
• Tone dialing (DTMF),
• Pulse dialing (P).
NNNNNNNNNNNN
Open the Menu.
MENU

Scroll to Base Settings and press OK.

Scroll to Special Functions and press OK.

Select Dial Mode and press OK.
Scroll to the desired dialing mode and press OK.

Setting the Flash Time

Prerequisite:
Your PBX requires a flash time different from the
preset flash time. Please refer to the operating in-
structions of your PBX.
NNNNNNNNNNNN
Open the Menu.
MENU

Scroll to Base Settings and press OK.

Scroll to Special Functions and press OK.

Scroll to Flash Time and press OK.
Scroll to the required flash time and press OK.
Options (in milliseconds):
80, 100, 120, 180, 250, 300, and 800
The current setting is marked with a
'
.