Publicidad
Wire switching inputs "Ext. input 1 and 2" of the CLV69x on the CDM420-0006 connection module
a) Sensor supplied by CDM420-0006
e.g. photoelectric sensor
U
V
Out
GND
PNP sensor
CDM420-0006
Terminal X
18
19
Switch S6 : SGND
ON: connect GND of the switching inputs with
OFF: sensors connected volt-free to the switching
Reference potential valid for all "Sensor 1 and 2"
switching inputs and optionally "AUX In 1 and 2".
b) Sensor connected volt-free and externally supplied
e.g. photoelectric
U
V ext
sensor
U
39 +24 V*
V
18 Aux In 1
Out
GND
17 SGND
8 Shield
PNP sensor
S6 : SGND
ON
OFF
d) Switch connected volt-free
and externally supplied
Connection of the switch as under b)
Functional assignment for switching inputs
via SOPAS-ET configuration software
Figura 84: Entradas conmutadas "Entrada externa 1 y 2"
8025632/131W/2019-03-06 | SICK
Sujeto a cambio sin previo aviso
CDM420-0006
39 +24 V*
+24 V*
X
Name
6.64 K
U
3.32 K
e
17 SGND
S6
8 Shield
GND
S6 : SGND-GND
S8 : CMC
ON
No
OFF
YES
Name
Aux In 1
Aux In 2
the GND of the CDM420-0006/CMC600.
inputs of the CDM420-0006/CMC600.
CDM420-0006
+24 V*
CMC600
U
e
S6
SensGND
GND
S8 : CMC
No
YES
CMC600
Serial Aux
(RS-232)
SensGND
U
= max. 30 V
e
The CMC600 automatically transmits the
output states of its physical "Aux In 1 and
2" inputs to the serial Aux interface of the
CLV69x via the connecting cable using
software.
The CLV69x translates the statuses to its
logical "External input 1 and 2" inputs.
a) Switch supplied by CDM420-0006
CDM420-0006
39 +24 V*
18 Aux In 1
17 SGND
8 Shield
S6 : SGND
ON
OFF
Characteristic data of switching inputs "Ext. input 1 and 2"
Switching
Current at the input starts the assigned
behavior
function, e.g. start reading cycle. (CLV69x
default settings: logic active high, deboun-
cing 10 mm)
– Opto-decoupled, reverse polarity protected
Properties
– Can be wired with PNP output of a sensor
– SensGND is the common insulated
reference potential for all switching inputs
Low:
U
≤ 2 V; I
Electrical
e
values
High:
6 V ≤ U
0.7 mA ≤ I
I N S T R U C C I O N E S D E S E R V I C I O | CLV69x
INSTALACIÓN ELÉCTRICA
CLV69x
"External
input 1,
input 2"
+24 V*
CMC600
U
e
S6
SensGND
GND
S8 : CMC
No
YES
≤ 0.3 mA
e
≤ 30 V;
e
≤ 5 mA
e
6
85
Publicidad
Capítulos
