Pratissoli LK Serie Manual De Reparación página 42

Unscrew the attachment screws of the left and right PTO
bearing cover (pos. , Fig. 26) and take the two covers off the
PTO shaft. To help with their removal, use 3 x M8 grub screws
or screws (pos. , Fig. 27) as extractors.
Take out the radial seal ring (pos. , Fig. 28), the outside
O-ring (pos. , Fig. 29) and the lubrication hole O-ring (pos. ,
Fig. 30).
Fig. 26
Roll back the three connecting rods as far as possible (until
they touch the bend shaft).
Using an extractor hammer (pos. , Fig. 31) take out the PTO
Fig. 27
shaft from either one of the two sides (pos. , Fig. 32).
Fig. 28
42
Fig. 29
Fig. 30
Fig. 31