Installation And Hook-Up - Fulgor Milano F6DW24 SS1 Manual Del Usuario

EN
8
To install and hook up this appliance, consult the attached installation manual.
46
USER INSTRUCTIONS

INSTALLATION AND HOOK-UP

DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON
THE SHARP EDGES OF THE APPLIANCE; WEAR SAFETY GLOVES.
INSTALLATION, REPAIRS AND SERVICING MUST BE PERFORMED
BY QUALIFIED AND AUTHORIZED TECHNICIANS. AS WELL AS IN-
VALIDATING THE WARRANTY, WORK CARRIED OUT BY UNAUTHOR-
IZED PERSONS MAY GENERATE HAZARDS. INSTALLATION MUST BE
PERFORMED IN COMPLIANCE WITH ALL THE DIRECTIVES IN FORCE
IN THE COUNTRY OF INSTALLATION AND, IF THESE DO NOT EXIST: IN
THE UNITED STATES THE NATIONAL ELECTRIC CODE; IN CANADA THE
CANADIAN ELECTRIC CODE C22.1 - LATEST EDITION/PROVINCIAL
AND MUNICIPAL CODES AND/OR LOCAL CODES.
BUILDING-IN A DISHWASHER UNDERNEATH A CERAMIC
IS ABSOLUTELY FORBIDDEN. A DISHWASHER CAN BE BUILT-IN
UNDER-NEATH A CONVENTIONAL HOB PROVIDED THERE IS NO
BREAK IN THE KITCHEN WORKTOP, AND THE DISHWASHER AND
ARE INSTALLED AND SECURED CORRECTLY, SO THAT
NO HAZARDS ARE GENERATED.
PREVENTING THE RISK OF CLOGGING OR DAMAGE: IF THE WA-
TER PIPE IS NEW OR HAS NOT BEEN USED FOR A LONG TIME, BEFORE
CONNECTING TO THE WATER SUPPLY CHECK THAT THE WATER IS
CLEAR AND FREE OF IMPURITIES, TO PREVENT DAMAGE TO THE AP-
PLIANCE. THE DISHWASHER MUST ALWAYS BE CONNECTED TO
THE WATER SYSTEM WITH NEW HOSES; OLD OR USED HOSES
MUST NEVER BE REUSED.
CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE
THE APPLIANCE POSI-TIONED ON THE INNER EDGE OF THE DOOR.
IN THE EVENT OF DAMAGE TO THE
PLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL
SERVICE CENT .
MATCH THE RATINGS ON THE NAME PLATE OF
CORD, HAVE IT RE-