Preparations; How To Install Filter - Coway AP-1511FHE Manual De Instrucciones

PREPARATIONS

Please check before use
The product is for 120 V~ 60 Hz only .
Make sure to connect the power plug to a grounded electric outlet
(120 V~ 60 Hz) dedicated to the product.

How to install filter

- Always remove filter wrapping before installation.
- The unit is for residential use and thus for indoor only.
- Remove power plug from the socket when not in use.
Tips
- Check front part of the filter when installing unit.
1 . Open the front cover by pulling out the end part
above the air inlet .
2 . Please take out the filter by
pushing the both hooks of the
filter, and remove its packing
sheet .
3 . Please insert the filters according to the following
orders; Activated carbon deodorization filter 
Antibacterial catalysis filter  RBD plasma filter 
ANTI-FLU HEPA™ filter  Legionella filter  Pre filter
Please be sure to check if all the filters are facing the
right direction . Fasten both sides of the filters until it
clicks . Be sure to lock tight Pre Filter with the rest of
the filters using the screw .
4 . Please close the front cover .
9
▶