Drive Chain Tension - SHERCO SE 4.5i-f Manual De Propietario

BRAKE PEDAL POSITION
1
2
- The free travel of the brake pedal must
be 3 mm as minimum.
- Loosen the locknut 2
- Turn the stem 1 until you achieve the
desired result.
- Re-tighten the locknut 2
15mm 15mm - The upper extremity of the brake pedal
should be located at approximately 15
mm below the upper part of the foo-
trest.

DRIVE CHAIN TENSION

Lift the chain as shown
The position of the chain must be close
to that represented on the picture.
Poorly adjusted chain tension can lead to
mechanical damage
Adjusting the brake pedal position
Free position
Bike on a suitable stand
WARNING
71