SHERCO SE 4.5i-f Manual De Propietario página 85

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6
7
Torque
Plug 1
Plug 2
Plug 6
OIL CHANGE
22Nm
22Nm
15Nm
Remove oil filter
- Unscrew plug 6
- Remove the filter 7 with an hook
- Let the oil flow out
Filling engine oil
- Fit a new oil filter, in the correct direc-
tion, as shown on photo.
- Replace the cap 6 and screw to 15Nm
- Replace the plug 2 and screw to 22Nm
- Replace the pre-filter 3 and the plug 1
as shown on photo
- Tighten the plug 1 to 22 Nm
- Unscrew the engine oil filler cap num-
ber 2 page 66
- Pour in approx. 1,1 litre of oil recom-
mended by the manufacturer.
- Check the level of oil through window
as explained on page 66.
- Top up the level if necessary
The filter 7 must be replaced after
every oil change.
To protect the environment, old oil and
filters should be deposited at a collection
center.
NOTE
WARNING
83

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Se 5.1i-fSe 2.5i-fSe 3.0i-f

Tabla de contenido