Signs And Symbols Used; Symbol Description; Nameplate - Abicor Binzel ABIPLAS CUT 70 Instructivo De Servicio

®
ABIPLAS CUT
Type
Material thickness [mm]
Steel
Stainless steel
Aluminium
Tab. 4 Standard values for cutting capacity
Version
Standard length
Power/air cable connection
Tab. 5 Cable assembly

3.2 Signs and symbols used

The following signs and symbols are used in the operating instructions:

Symbol Description

• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession

3.3 Nameplate

The plasma cutting torches are marked as follows:
1
Nameplate on the back
Fig. 1
When making enquiries, please note the following information:
Type designation on the torch handle, for example ABIPLAS
torch.
BAL.0099 • 2018-11-08
®
ABIPLAS CUT 70
®
ABIPLAS CUT MT 70
20 (max. 25) at 70 A
13 (max. 15) at 50 A
18 (max. 25) at 70 A
13 (max. 15) at 50 A
15 (max. 20) at 70 A
8 (max. 10) at 50 A
Direct connector or central connector
6 m (other lengths available on request)
G1/4"
1
A B I C O R
BINZEL
ABIPLAS 110
Nameplate
®
ABIPLAS CUT 110
®
ABIPLAS CUT MT 110
35 (max. 40) at 110 A
30 (max. 35) at 90 A
30 (max. 35) at 110 A
25 (max. 30) at 90 A
25 (max. 30) at 110 A
20 (max. 25) at 90 A
2
2 ABICOR BINZEL label
®
CUT 70 on the manual welding
3 Product description
®
ABIPLAS CUT 150
®
ABIPLAS CUT MT 150
50 (max. 55) at 150 A
35 (max. 45) at 120 A
40 (max. 45) at 150 A
30 (max. 40) at 120 A
35 (max. 40) at 150 A
25 (max. 35) at 120 A
EN - 7