Connecting The Plasma Cutting Torch - Abicor Binzel ABIPLAS CUT 70 Instructivo De Servicio

®
ABIPLAS CUT
1
®
ABIPLAS MT 70
1 CUT
Fig. 7 Overview of the clamping area

7.2 Connecting the plasma cutting torch

Requirements for connecting the torch
1 Only use compressed air which is free from dirt, oil and water.
2 Ensure that the connections are properly assigned and tightened.
3 Ensure that the correct air pressure (flow pressure) and correct air volume are set. Insufficient
air volumes can lead to the torch overheating.
BAL.0099 • 2018-11-08
2
®
ABIPLAS MT 110
2 CUT
7 Operation
3
®
ABIPLAS MT 150
3 CUT
EN - 17