Maintenance Work - Steelcase Bivi Guía Rápida

Interval Inspection point
Annually Connections with
thumb screws
Regularly Desktop
Electrical
components
Table 5.1: Function check

Maintenance work

Only authorised specialist personnel may carry out maintenance work. Please contact customer service (see
Maintenance work
Steelcase assumes no liability or warranty in the following cases:
■ Inadequate monitoring of product components (functional checks) and improper maintenance
■ Maintenance by third parties or unqualified and unauthorised personnel
■ Use of components and adaptations that do not originate from Steelcase
■ Unauthorised modifications of the product in its construction and design as well as intentional misuse
■ Improper use
Cleaning and care
You can use commercial cleaning agents to clean the surfaces of the office furniture system Bivi.
Electric shock!
Moisture increases the risk of electric shock.

Do not touch electrical components (such as plugs) with a damp cloth or liquids.

Switch off the power supply before cleaning (e.g. pull the mains plug).
 Wipe surfaces with a damp cloth.
 Wipe upholstery fabrics with commercially available cleaning agent.
7. Service and contact details
Manufacturer
Steelcase AG
Brienner Str. 42
80333 München
Phone: +49 (0) 89 24 88 14 62 000
E-mail: info@steelcase.de
www.steelcase.com
127197
Function check
Check for firm seating
Check for horizontal alignment
Cables: Check insulations for defects
Cables: Check distance to heat
sources (e.g. radiators).
Mains cable
LineOne EMEA
Service phone number: +49 (0) 80 31 405 – 111
Service Email:
Permissible value Measures if necessary
Firm seating


Horizontal

No damage

Sufficient distance

No damage

Service and contact details
DE lineone-de@steelcase.com
EN lienone-en@steelcase.com
FR lineone-fr@steelcase.com
ES posventaspain@steelcase.com
BIVI
Tighten
Replace screw connection if
necessary
Align using the set screws on
the feet
Replace if defective
Establish distance
Replace if defective
, Page 8).
15