Maintenance; Replacing Components; Cleaning The Module; Moving The Module - Steelcase Spine 3FH Manual De Instrucciones

• Make sure routed cables cannot cause stumbling.

Maintenance

Replacing components

Work on electrical components (e.g. lights, sockets) may
only be carried out by qualified personnel.

Cleaning the module

WARNING
Moisture increases the risk of electric shock.
— Do not touch electrical components (lights, plugs, etc.)
with a wet cloth or liquids.
— Switch off the power supply before cleaning.
• Wipe off upholstery fabrics with commercial cleaning agent.
• Use a damp cloth to wipe off surfaces.
• Wipe lights and monitors (optional) with a dry and antistatic
cloth. If necessary, use commercial screen cleaner.

Moving the module

The Spine module may only be moved disassembled with
tables de-mounted. The tables may only be demounted by
qualified personnel.

Functional checks

A functional test shall be carried out by the installer after assem-
bly. This shall be recorded.
• Keep the signed protocol of the functional test with the in-
structions.
• Before each height adjustment, observe the table "Functional
checks" in the operating instructions of the table.
• In addition, regularly perform the following functional checks
of the Spine module:
Inspection point Function check
Cable • Check insulation
for defects.
Cable • Check distance to
heat sources (e.g.
radiators).
Light • Check for firm
seat.
Light • Check function.
Power closet • Check the door for
correct closure.
116 1074 001 / 01 – 02/2018
14
Inspection point
Lockable sto-
rage compart-
ment
Lockable sto-
rage compart-
ment
Active Layer

Storage

If the Spine module is to be temporarily stored, the following
storage conditions must be met:
• Undamaged transport packaging
• Sufficient carrying capacity of the floor.
• Dry floor.
• Horizontal storage surface.
• Temperature range +5 °C to +40 °C.

Disposal

The Spine module may only be disassembled by qualified
personnel.
• Adhere to the manufacturer's instructions when disassem-
bling. Steelcase AG makes the instructions for disassembly
available on the Internet at the following address:
www.steelcase.com/eu-en/ShareIt-Collection-guide
• Separate the disassembled parts of the module by material
groups and dispose of according to local laws and regula-
tions.
Measure
• Replace if
defective.
• Establish
distance.
• Press into the
holder.
• Replace if
defective.
• Close the door.
Function check Measure
• Check the door for • If necessary,
correct closure. have the lock
replaced.
• Check for firm • If necessary,
seat. have it repaired.
• Check for firm • If necessary,
seat. have it replaced.