Solar 4001 Manual Del Proprietário página 10

– thin red wire to (R2) Positive (POS, +) Terminal of Battery #2
– thin black wire (B2) to Negative (NEG, –) Terminal of Battery #2
10. Using hardware supplied with batteries, secure the terminal connections on each battery post. Follow all battery
manufacturer's recommend torque specifications to ensure secure, lasting connections.
11. Connect Output cables via Quick Connection to the matching gray Quick Connect housing at the rear of the
Battery Tray.
Your Model No. 4001 jump starter is now wired for 12/24V operation.
Mount Remote Switch Storage Bracket
Using (4) #4 x 3/8" sheet metal screws, mount Remote Switch Storage Bracket to side of Control Cabinet by inserting
screws through the holes in the Storage Bracket and into the holes in the side of the Control Cabinet.
Set Battery Type
The charging system on Model No. 4001 is designed to accommodate either flooded (wet cell) batteries or AGM
batteries. On the top of the Control Cabinet is an indicator switch used to optimize the charging routine based on the
battery type chosen. Set Battery Type Indicator Switch to the proper setting based on the batteries installed. This will
ensure a proper charge every time.
NOTE: We recommend setting the timer to the shortest manageable duration. Output is live until timer times out,
even if the jump starting event has ended. Always take care not to short output when unit is in "Boost Mode Engaged"
status.
Set Timer Duration
Model No. 4001 incorporates a Remote Switch to engage the starting function
(BOOST MODE). The unit is engaged in starting mode as long as the Remote
Switch is depressed. Some applications involving use on larger vehicles prevent
the operator from keeping the Remote Switch depressed while starting the
vehicle. For these situations, we have added a Timer function to the Remote
Switch's operation.
Once the Remote Switch is depressed and released, the BOOST MODE is
engage for a period of time base on the setting of the Timer on the top of
the Control Cabinet. Set Timer to your desired duration. This setting can be
adjusted from start to start.
10