Solar 4001 Manual Del Proprietário página 7

ASSEMBLY AND CONFIGURATION INSTRUCTIONS
Unit Contents
– Battery Tray Assembly, with Wheels
– Upper Handle Assembly
– Control Cabinet Assembly
– Voltage Selector Cable
– Output Cable Set with Clamps
– 3 Input Power Cords (North America, EU, UK)
– Remote Switch Storage Bracket
– Polybag Containing Hardware
(2) M6x60mm Hex Bolts, (6) M6x40mm Hex Bolts, (13) M6 Flat Washers, (9) M6 Hex Nuts,
(4) #4 x 3/8" Sheet Metal Screws
Tools Needed
– 2 x 10mm Wrench or Socket
– #2 Phillips Screwdriver
Initial Unit Assembly
1. Remove the Battery Tray Assembly, Upper Handle Assembly and Output Cable Set from the Shipper Carton.
Remove bubble wrap from around Battery Tray Assembly and Upper Handle Assembly.
2. Open the Battery Tray Assembly to expose the Charger Cabinet Assembly, which is placed inside of the
Battery Tray Assembly for shipment. The Charger Cabinet will be covered by a protective shipping wrapper,
which should be removed at this time.
Handle Assembly
3. Inspect Control Cabinet assembly for damage. For instance, all wires exiting cabinet are terminated (with
Anderson connectors, ring terminals, etc.).
Recommended Battery Specifications
1. Model No. 4001 is designed to be used with (2) installed Group 31
batteries equipped with top-mounted, threaded stud terminals, with
a starting capacity of 900-1200 CCA each. (Smaller batteries can
be installed, but this will likely result in decreased starting power
and care will need to be taken to ensure that the batteries are
properly secured in place.)
2. When installing flooded (wet cell) batteries, use batteries with
sealed top or with screw type flush fill caps. This will help reduce
acid leakage should the unit be inadvertently laid flat or turned over.
3. A high quality battery emits fewer gases as it recharges. Using a
high quality battery will extend charger and wiring life. Battery acid
and petroleum resistant wiring is used in this unit. Battery fluid level
(wet cell batteries) must be checked every 30 to 45 days.
Mounting Control Cabinet
7
Run cables
Control Cabinet with Charging
Quick Connect Wires Protected
between
brackets