Oasis 1996-1999; Odyssey 1995-1998; Odyssey 1999-2004 - Metra INST-7898 Instrucciones De Instalación

Honda Odyssey 1995-1998
Isuzu Oasis 1996-1999
1. Lower the glove box assembly.
2. Remove (2) Phillips screws exposed
on the right side of the underdash.
3. Remove (2) Phillips screws from the
driver's side knee bolster and (1)
Phillips screw in the coin pocket.
4. Remove (5) Phillips screws from the
underdash panel and remove the
panel. (Figure A)
(Figure A)
Dash Disassembly
5. Remove (4) Phillips screws from the
cupholder assembly and remove.
6. Remove (2) Phillips screws
securing the factory radio and
disconnect the wiring.
7. Cut and remove all of the mounting
clips on Radio Housing (a) EXCEPT
clips "D" and "H" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
"D"
"D"
"H"
"H"
(Figure B)
®
INST-7898
Honda Odyssey 1999-2004
1. Unclip the radio trim bezel
(including the climate control
panel) and remove). (Figure A)
2. Remove (4) Phillips screws
securing the factory radio and
disconnect the wiring.
3. Cut and remove the mounting clips
from Radio Housing (a) .
4. Locate tabs "B" on the mounting
brackets for mounting, cut and
remove tabs "A" (the tabs can be
identified by the stamped letter
near each tab). (Figure B)
5. Secure the brackets to the housing
with (4) #8 x 3/8" Phillips pan head
screws. (Figure B)
Continue to kit assembly
11
(Figure A)
"B"
(Figure B)