Din Radio Provision - Metra INST-7898 Instrucciones De Instalación

For the Honda Accord 1998-2002 /
Odyssey 1999-2002 follow the next
(6) steps. For all other applications
skip to All Other Models:
1. Secure the radio brackets to radio
housing (a) using (4) #8 X 3/4"
screws Phillips pan head screws
provided.
2. Remove the metal DIN sleeve from
the aftermarket radio.
3. Slide the sleeve into the assembly
and secure by bending the metal
locking tabs down. (Figure A)
4. Slide the radio back into the sleeve
until it click in.
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly

DIN radio provision

(Figure A)
®
INST-7898
All other models:
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into radio housing
(a) and secure by bending the metal
locking tabs down.
Note: For the Honda Civic 2001-
2005 (non "si" model), use Radio
Housing (b) instead.
3. Slide the radio back into the sleeve
until it clicks in. (Figure A)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation.
5. Reassemble the dash in reverse
order of disassembly.
**For the Honda Accord 1994-
1997 and Acura CL 1997-1999:
Mount the rear support bracket (b)
to the rear support provision with
(2) bolts previously removed in dash
disassembly. (Figure B)
14
**For the Acura RSX 2002-2006:
Mount rear support bracket (a) to
the rear support provision with (2)
#8 x ¾" Phillips pan head screws
included. (Figure B)
(Figure A)
(Figure B)